Zebra Barrell Mixers allow for consistent fluid mixing and provides superior emulsions resulting in consistent concentration values. Maintaining consistent concentration values in your coolant extends sump and tool life while improving machined surfaces. It also provides a savings for raw material usage.
Separate water shut-off valve
Machined from solid bronze casting with galvanized steel stand pipe
Maximum viscosity of 500 SUS
40 inch discharge tube included (max length for delivery)
Maximum viscosity of 500 SUS
Fits drums, pails, or totes
Prevent tampering with the Mixer Lockout (#MIXXLOCK)
3 POINT ACCURACY USING FORCE-FLO™ TECHNOLOGY
Machined needle valve
Locknut below dial holds mixing reference
Standpipe check valve keeps mixing chamber loaded
Part Number
GPM
Low
High
Max Mix Ratio
Range psi
In
Out
MIX0327
3
0
7
15:1
25-75
3/8"
1/2"
MIX03725
3
0
25
4:1
25-75
3/8"
1/2"
MIX1027
10
0
7
15:1
25-75
1/2"
3/4"
MIX10725
10
0
25
4:1
25-75
1/2"
3/4"
Our machinist mixers require a minimum pressure of 25 psi.
TEST METHOD With a 5-gallon pail marked in gallons, fill the pail to the one gallon mark with the water valve fully opened. If you fill to the 1 gallon mark in 20 seconds there is enough pressure for our 3 gpm unit. If you fill to the 1 gallon mark in 6 seconds there is enough pressure for our 10 gpm unit.
